Ready to Proceed?
Request a Firm Quotation for 150 kVA 13.8kV Three-Phase Pad-Mounted...
Share your project specifications and receive an official CIF quotation within 24 hours.
Compact Substations
American Type (ANSI)
SKU: 150_KVA_13_8KV_THREE_PHASE_PAD_MOUNTED_TRANSFORMER_ANSI_C57
150 kVA 13.8kV Three-Phase Pad-Mounted Transformer (480Y/277V Loop Feed)
150 kVA three-phase loop-feed pad-mounted transformer with 6 high-voltage bushing wells (IEEE 386) and 4-position sectionalizing oil load break switch. Engineered for commercial plazas and industrial underground loops.
Compliance Standards
IEC • ANSI • IEEE • GB
Quality Inspection
100% FAT Routine Tested
Engineering CAD
2D CAD / SLD Schematics
Global Logistics
Direct Seaport CIF Export
Engineering Datasheet
150 kVA 13.8kV Three-Phase Pad-Mounted Transformer (480Y/277V Loop Feed) — Technical Parameters & Ratings
Specification data is being updated for this product SKU.
Engineering Submittal & Layout Workbench
Substation Room Fit & Multi-Equipment CAD Footprints
Select your equipment type and capacity to inspect verified GA engineering CAD line drawings, Single Line Diagrams (SLD), dimensions (L × W × H), roller gauge, and submittal clearances before procurement.
Available Ratings:
11kV / 33kV Dual Voltage
IEC 60076 / IEEE Compliant
100% Routine Factory Tested
Export Nitrogen / Seaworthy Pack
1000 kVA Technical Dimensions
IEC 60076-1International utility & industrial submittal specifications
| Overall Length (L) | 1,750 mm |
|---|---|
| Overall Width (W) | 1,120 mm |
| Overall Height (H) | 1,780 mm |
| Roller Wheel Track Gauge (D) | 820 mm |
| Total Equipment Net Weight | 3,820 kg |
| Min Substation Clearance | 1,000 mm surrounding |
| Rated Voltage / System | 11 kV / 33 kV Dual Primary |
| Applicable Standard | IEC 60076-1 / IEEE C57 |
Download Technical Data Sheet (PDF)
Request Factory Engineering Submittal Package
Full CAD DXF/DWG vector footprints, 3D STEP models, and custom project submittals provided within 2 hours upon request.
PSCAD™ & ETAP® Grid Simulation
Non-Linear V-I Saturation Curve & Air-Core Inductance (\(L_{\text{air}}\))
Precision core excitation characteristics, non-linear knee inflection (\(V_k\)), and air-core reactance (\(X_{\text{air}}\)) calibrated for 150 kVA 13.8kV Three-Phase Pad-Mounted Transformer (480Y/277V Loop Feed).
Quick Rating Switch
kVA
kV
%
2.10
1.80 (Compact Shell)
2.10 (Standard IEEE / CIGRE)
2.50 (Outer HV Layer)
Air-Core Inductance (\(L_{\text{air}}\))
18.7× In Peak
81.65 mH
Reactance
25.65 Ω
Knee \(V_k\)
13.0 kV
Decay \(\tau\)
0.17 s
Non-Linear Magnetization Characteristic (\(\lambda - I_{\text{exc}}\))
Interactive Vector Plot
Linear Core Zone
Knee Transition
Air-Core Slope (\(X_{\text{air}}\))
| PSCAD Simulation Point | Voltage (\(V_{\text{pu}}\)) | Flux (\(\lambda\), Wb-t) | Current (\(I_{\text{pu}}\)) | Current (A) |
|---|
Data formatted for direct entry into PSCAD Classical Saturable Transformer and UMEC core components per IEEE C57.12.00 & CIGRE 33.02.
XinHuan Hefei Manufacturing Plant — American-Type Pad-Mounted Substation Assembly Line
Factory Build Quality
150 kVA 13.8kV Three-Phase Pad-Mounted Transformer (480Y/277V Loop Feed) — Internal Construction & Premium Materials
Built with tier-1 certified raw materials engineered for long operational life (>30 years), superior dielectric withstand, and high short-circuit withstand capacity.
Silicon Steel Core
High-grade grain-oriented cold-rolled silicon steel with step-lap mitered joints for low $P_o$ losses.
100% Copper Windings
Electrolytic oxygen-free copper with high thermal grade insulation for surge resistance.
Loadbreak Switching
Two-position (radial) or four-position (loop feed) oil-immersed rotary loadbreak switch rated up to 630A.
ANSI Pad Protection
Bay-O-Net expulsion fuse in series with ELSP back-up fuse, automatic pressure relief valve, and liquid level gauge.
Quality Assurance
CNAS & ISO 9001 Certified
150 kVA 13.8kV Three-Phase Pad-Mounted Transformer (480Y/277V Loop Feed) — 100% Factory Acceptance Testing (FAT)
Every transformer unit manufactured by XinHuan undergoes mandatory routine factory testing prior to container dispatch. Full certified routine and type test submittal reports are provided with commercial documentation:
1. Insulation Resistance
Megger test (HV to LV, HV to Earth, LV to Earth) >1000 MΩ.
2. Voltage Ratio & Vector
Turns ratio check across all taps with phase displacement check.
3. Winding DC Resistance
Precision Kelvin bridge measurement across all tap positions.
4. Short-Circuit Impedance
Load loss ($P_k$) measurement corrected to reference temp (75°C).
5. No-Load Loss & Current
Core excitation test ($P_o$ and $I_o$) at rated sinusoidal voltage.
6. AC Voltage Withstand
Power-frequency separate source test (e.g. 50kV/70kV 1 min).
7. Lightning Impulse (BIL)
Full wave & chopped wave impulse withstand (BIL up to 170kV).
8. Partial Discharge & Seals
Dead-front dielectric test, ANSI C57.12.28 tamper resistance & pressurized tank seal verification.
Logistics Intelligence
Global CIF / FOB Delivery
150 kVA 13.8kV Three-Phase Pad-Mounted Transformer (480Y/277V Loop Feed) — Export Packaging & Seaport Logistics
Export-grade fumigated wooden case with internal bracing and waterproof barrier. Direct CIF/FOB shipping.
Production Lead Time
Standard manufacturing cycle is 4 to 6 weeks from approval of GA blueprints and single-line diagrams.
Heavy-Duty Export Packaging
Vacuum moisture barrier preservation, nitrogen blanketing, and reinforced steel-frame structural crate skids.
Direct Seaport Routes
Fast ocean freight to Port of Chancay & Callao (25-35 days), Manila, Lagos, and Middle East ports.
Equipment Video Inspection
100% TestedWatch XinHuan technicians perform routine dielectric testing, winding insulation checks, and quality inspections inside our Hefei manufacturing plant.
Every unit 100% routine tested before container loading.
Direct Factory Consultation
Need Custom Project Engineering?
Send your single-line diagram (SLD), voltage ratings, or tender specifications. Our chief electrical engineers will review and issue an actionable CIF quotation within 24 hours.
Custom Voltage Ratios
High-Altitude Derating
Short-Circuit Impedance
Third-Party FAT Witness
150 kVA 13.8kV Three-Phase Pad-Mounted Transformer (480Y/277V Loop Feed) — Engineering & Procurement FAQs
Frequently asked questions regarding specifications, certifications, and delivery for 150 kVA 13.8kV Three-Phase Pad-Mounted Transformer (480Y/277V Loop Feed).
Please send us your required capacity, primary voltage, secondary voltage, and destination port for 150 kVA Three-Phase Pad-Mounted Transformer (480Y/277V Loop Feed). Our engineering team will provide CAD submittals and an official factory direct quotation within 24 hours.
ANSI/IEEE C57.12.34 / IEEE C57.12.28 / IEEE C57.12.90
Standard manufacturing lead time is 4 to 6 weeks following approval of GA blueprints and single-line diagrams. Direct sea container shipping is available under FOB, CFR, or CIF terms with full customs documentation (Bill of Lading, Certificate of Origin, Test Reports).
PARENT ENGINEERING PILLAR
IEEE C57.12.34 · Dead-Front Loop & Radial Feed (75–3000 kVA)
ANSI Pad-Mounted Transformers Pillar Guide
Compare full capacity no-load loss ($P_0$), load loss ($P_k$), impedance ($U_k\%$), dimensional weights, and routine test tolerances across all models in this series.
Engineering Reference Silo
Transformer Category Pillars & International Standards
Engineering Link Magnets & CAD Resources: